Static Conductive Surface Veil: It is made of high-strength, non-wear and non-break polyester fiber and conductive material through a special process. The felt surface is uniform and flat, with good air permeability and uniform surface resistance. It has the performance of high static conductivity and static discharge. It is widely used in anti-static glass
The Surface Felt (see Figure) is denser than the chopped strand felt. The resin-rich layer enhanced by the surface felt has better permeability resistance, which can prevent the protruding burrs of the chopped strand felt from extending to the surface of the resin-rich layer to form a corrosion channel with a capillary effect, which can
Application of Polyester Surface Felt in FRP Helmets The application of polyester surface felt in FRP helmets is achieved through hand-paste process. Polyester surface felt can play a role of resin enrichment when used on helmets, so that glass fiber and resin can be well compounded together, enhancing the
Polyester surface felt uses a special penetration process to treat polyester fibers, making it easier for the resin to penetrate, faster, and more fully absorb the resin, improving the quality of the resin layer on the surface of FRP; the fibers are evenly dispersed, soft to the touch, and have good air permeability. The
Dymriton supplies technical knowledge and high-quality solutions and products with an unprecedented specialty technology and manufacturing method in the field of composite nowadays.
We are dedicated to providing you with the best products possible.
No 2-4, Cailing Road, Mahang
Street, Hutang Town, Wujin
District, Changzhou City
Jiangsu, China.
Tel: +86 519 6868 8566
Fax: +86 519 6868 8566
Mob: +86 138 135 45782
Email: info@dymriton.com
Web: www.dymriton.com
© Copyright 2012 - 2026 | Dymriton | All Rights Reserved | Powered by Composite Material
