Detailed Explanation of the Operation Steps of Composite Material Vacuum Forming Process

 

 

Vacuum Infusion Molding Process (Wet Method) Operation Steps

1 Mold preparation, apply release agent

2 Product layering (hand lay-up, spraying, prepreg)

3 Lay release cloth

4 Lay isolation film or perforated isolation film (optional)

5 Lay breathable felt

6 Paste sealing strip (can be done in advance)

7 Lay vacuum bag film

8 Install vacuum valve, quick connector and vacuum tube

9 Connect air source and check vacuum degree

10 Vacuum and solidify product

11 Product demoulding

 

Operation Diagram:

Apply Release Agent

 

Product Lamination

 

Lay the Release Cloth

 

Laying Perforated Isolation Film

 

Lay Breathable Felt

 

Paste the Sealing Strip

 

Laying Vacuum Bag Film

 

Sealing of Vacuum Bagging Film

 

Install Vacuum Valve, Quick Connector and Vacuum Hose

 

Leak Detection with Leak Detector

 

Product Curing

 

Vacuum Bag Demoulding

 

Product Demoulding

 

 

Operation Steps of Vacuum Resin Introduction Method

1 Mold preparation, apply release agent

2 Gel coat, product layering (reinforcement material without resin)

3 Lay release cloth

4 Lay guide cloth and guide tube

5 Paste sealing strip (can be done in advance)

6 Lay vacuum bag film

7 Install vacuum valve, quick connector and vacuum tube

8 Connect air source and check vacuum degree

9 Vacuum and introduce resin

10 Product curing

11 Product demoulding

 

Operation Diagram:

Mold Preparation – Gel Coat Spraying

 

 

Lay the Reinforcement Material (Fix with Spray Glue)

 

Lay the Release Cloth

 

Paste the Sealing Strip

 

Arrangement of Airway

 

Laying Guide Cloth (Guide Net)

 

Install the Guide Tube and Resin Tube

 

Sealing Vacuum Bag Film

 

Check Vacuum

 

Vacuuming and Pressurizing

 

Import Resin

 

Resin Collector Prevents Resin from Entering the Vacuum Pump

 

Product Demoulding