Composite Materials Technology Issue 3 --- Resin Transfer Molding Technology (Since There are Too Few Articles on this Technology in China, the Editor Updates it Slowly)   Resin Transfer Molding is referred to as RTM (Resin Transfer Molding). RTM started in the 1950s and is a closed mold molding technology improved from the hand

  DLR Develops Automated Production Line for Resin Transfer Molding (RTM)     According to Composites World magazine in January 2016, the Lightweight Production Technology Center of the German Aerospace Research Institute (DLR) has developed an automated production line called EVo, which can produce 100,000 complex composite parts per year.   EVo was originally designed

  Let You Understand the HP-RTM (High Pressure Resin Transfer Molding) Process   Process Definition   HP-RTM (High Pressure Resin Transfer Molding) is the abbreviation of high pressure resin transfer molding process. It refers to the process of using high pressure to mix resins and inject them into a vacuum-sealed mold pre-laid with fiber reinforcement

  New Aircraft Manufacturing Process-Compression Resin Transfer Molding (C-RTM)                                         IF COMPOSITE MATERIAL IS NEEDED, PLEASE GET A HOLD OF US IN WHICHEVER WAY IS MOST CONVENIENT. WE WILL REPLY YOU

  Rapid Resin Transfer Molding   RTM Molding Technology originated from the cold casting process in the 1950s, but the real RTM era is only about 20 years old. It was first developed in developed countries (the United States, Japan, Germany, etc.) and has been rapidly developed. In the past 20 years, RTM has been

  Resin Transfer Molding Process Used For the First Time in Large Aircraft Structural Parts       Airbus has begun production of resin transfer moulded spoilers for the A320neo family, the first time the process has been used for a large aircraft structural component.   The resin transfer moulding process involves fixing dry fibres

  Compare and Contrast Composite Liquid Molding, Resin Molding and Liquid Resin Infusion Molding Processes in One Article   Overview of Liquid Composite Molding (LCM) Process   There are many manufacturing technologies for high-performance composites today, the most widely used of which is prepreg technology. However, some parts can also be made directly from low-viscosity

Application of CFRP Forming Technology in Automobile Lightweighting     At present, composite materials for automotive parts can be divided into two categories: thermosetting and thermoplastic. The raw materials are mostly glass fiber. The main production processes are SMC, LFT and GMT processes. They are mainly used in roofs, rear doors and side doors, covers,

  Research Progress in Resin Transfer Molding of Composite Materials - 2   Introduction   Using composite materials instead of traditional steel and aluminum materials can significantly reduce the overall weight of the car body while improving the mechanical properties of the structure, effectively achieving lightweighting of the car. In recent years, it has been